APlusLift 10,000LB 2-Post Overhead Heavy Duty Car Lift with 5 Year Warranty – HW-10KOH-A

APlusLift HW-10KOH-A car lift (auto hoist) is one of the most affordable overhead car lifts built with quality materials and good workmanship. The lift has a strong double “S” column design to support 10,000 LB capacity. We also have AP-10SR 10000LB overhead car lift with single point release.

We are proud to offer an industry leading 3 year warranty for all parts ! We have all replacement and optional parts available for our lifts. We welcome suggestions to improve our products and service!

Specifications

• Model: HW-10KOH-A
• Lifting Capacity: 10,000 LB
• Overall Height: 143 3/16″
• Overall Width: 134 5/16″
• Maximum Lift Height with Truck Adapters: 81″
• Maximum Lift Height without Truck Adapters: 75″
• Minimum Height of Adjustable Pads from Ground: 4″
• Drive Through Width (Carriage to Carriage): 100″
• Column to Column Width: 109″
• Column Cross Section: 11″L x 7″W
• Driving Mode: Dual hydraulic cylinders, chain drive
• Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)
• Hydraulic Oil: 3-5 gallons AW32/AW46 (Not Included)
• Time to Full Rise: 50 seconds
• Shipping Weight: 1,470 LB
• Shipping Package Size: 113″L x 22″W x 40″H
• Concrete Requirement: 6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9,000 LB and below)

Parts Included:

• 4 adjustable screw pads
• 4 truck adapters (4″ tall height extensions)
• 10 anchor bolts
• 10 shims
• 2 tool trays
• 2 toe guards

Optional Parts:

• 2 3/4″ and 6″ Tall Truck Adapters
• Combo (Symmetrical and Asymmetrical) Arm Assembly
• Front Arms: Straight Front 3 Stage reach from 22 7/8″ to 42 5/8″
• Back Arms: Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″

Material Specifications:

• Column Steel Thickness: 13/64″
• Carriage Steel Thickness: 15/64″
• Carriage Yoke Thickness: 9/16″
• Arm Steel Thickness: 15/64″
• Base Plate Steel Thickness: 5/8″

Features

• CE Certified Lift Structure and Hydraulic System
• Third party tested with a dynamic load capacity of 115%
• Third party tested with a static load capacity of 150%
• Durable hydraulic system
• Easy to operate and maintain

• Double point safety lock release
• Double Seal Rings Protecting PU Material
• Carriage Material Q355 (ASTM A572), Stronger Than Normal Q235 Steel
• Lifting operation by pressing “UP” button on motor
• Manual lowering operation by pressing lever
• Relief valve built in power pump to prevent overloading
• Automatic arm lock restraints
• Relief valve built in power pump to prevent overloading
• Door guards protection rubber
• Up-limit switch to protect cylinders working stroke used in safe length scope
• Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life
• Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down